3. Place jars in the dishwasher. Place the lids and attachments on the top rack.
Use caution when handling the blade assemblies as the blades are very
sharp.
4. Whenever possible, rinse parts immediately after processing to make
clean-up easier.
5. Store the product in a cool, dry place.
NOTE:
You may also wash the jars by filling the jar to the max fill line with warm
water, adding a drop of dish washing detergent, placing the blade assembly
on the jar and pulsing a few times. Do not fill the jar more than the max fill
line with water because it will overflow. Once clean, remove the jar from the
motor base. Rinse the jar, attachment and lid under running water. Allow all
the parts to dry before storing.
Do not use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol, alcohol or acetone to clean the appliance
All detachable accessories can be cleaned in a dishwasher.
Tips:
Use a small brush (not included) to remove particles of food lodged
underneath the blades.
If some leftover particles dry onto the inside of the jar, fill the cup about 2/3
full with warm water and attach the blade subassembly. Place the jar and
blade subassembly onto the motor base and operate the appliance for
about 20-30 seconds to help loosen the stuck ingredients. Repeat the
above step but use clean tap water. Empty the blender and dry thoroughly.
CAUTION:
Do not try attempt to remove blades from the blade
subassembly for cleaning.
HOW TO STORE
1. Store the appliance upright. Do not place anything on top. Store the jars
and the rest of the attachments along side the appliance where they will
not be damaged and won’t cause a hazard.
2. Remove and empty the jar and ensure that no food is jammed in the
cutting blades.
