9
Step 3: Insert the assembled part from step 2 into the base, align the
holes, and secure the masts to the base using carriage bolts, washers, split
washers, and cap nuts as follows.
Step 4: Insert the two kneepads into the kneepad crossbeam, and secure
the kneepad with hex bolts, split washers, washers. Cover the bolt head with
plastic cover
Step 5: Insert the kneepad crossbeam to the mast. Align the square holes on
the kneepad crossbeam with the holes on the mast, and secure the kneepad
to the main assembly using carriage bolts, split washer, washer and cap nuts.
3
4
5
