background image

- 16 -

Limited Warranty

Warranty Period and Exclusions

: Broan-NuTone, LLC(the “Company”) warrants to the consumer purchaser of its product (“you”) that 

the product (the “Product”) will be free from material defects in the materials or its workmanship for a period of fi ve (5) years from the date 

of original purchase (or such longer period as may be required by applicable law) or a period of two (2) years from the date of service for 

any labor provided on the Product.

The limited warranty period for any replacement parts provided by the Company and for any Products repaired or replaced under this limited 

warranty shall be the remainder of the original warranty period (or such longer period as may be required by applicable law).

THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES AND BULBS, FUSES, FILTERS, DUCTS, ROOF 

CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING

.  This warranty does not cover (a) normal maintenance and service, (b) 

normal wear and tear, (c) any Products or parts which have been subject to misuse, abuse, abnormal usage, negligence, accident, improper 

or insuffi  cient maintenance, storage or repair (other than repair by the Company), (d) damage caused by faulty installation, or installation 

or use contrary to recommendations or instructions, (f) damage caused by exposure to salt air, (g) damage in transit, (h) natural wear of 

fi nish, (i) Products in commercial or nonresidential use, (j) damage caused by fi re, fl ood or other act of God, or (k) Products with altered, 

defaced or removed serial numbers. This warranty covers only Products sold to consumers in North America.
This warranty supersedes all prior warranties and, subject to applicable law, is not transferable from the original consumer purchaser.

No Other Warranties

: This Limited Warranty contains the Company’s sole obligation and your sole remedy for defective Products. The 

foregoing warranties are exclusive and in lieu of any other warranties and conditions, express or implied.  

TO THE MAXIMUM EXTENT 

PERMITTED  BY APPLICABLE  LAW,  THE  COMPANY  DISCLAIMS AND  EXCLUDES ALL  OTHER  EXPRESS  WARRANTIES AND 

CONDITIONS, AND DISCLAIMS AND EXCLUDES ALL WARRANTIES AND CONDITIONS IMPLIED BY LAW, INCLUDING WITHOUT 

LIMITATION THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

. To the extent that applicable law prohibits 

the exclusion of implied warranties or conditions, the duration of any applicable implied warranty or condition is limited to the period specifi ed 

for the express warranty above. Some jurisdictions (which may include the Province of Quebec or specifi c US states) do not allow limitations 

on how long an implied warranty lasts, so the above limitation may not apply to you. Any oral or written description of the Product is for the 

sole purpose of identifying it and shall not be construed as an express warranty.
Whenever possible, each provision of this Limited Warranty shall be interpreted in such manner as to be eff ective and valid under applicable 

law, but if any provision is held to be prohibited or invalid, such provision shall be ineff ective only to the extent of such prohibition or invalidity, 

without invalidating the remainder of such provision or the other remaining provisions of the Limited Warranty.

Remedy

: During the applicable limited warranty period, the Company will, at its option, provide replacement parts for, or repair or replace, 

without charge, any Product or part thereof, to the extent the Company fi nds it to be covered by and in breach of this limited warranty 

under normal use and service. The Company will ship the repaired or replaced Product or replacement parts to you at no charge. You are 

responsible for all costs for removal, reinstallation and shipping, insurance or other freight charges incurred in the shipment of the Product 

or part to the Company. If you must send the Product or part to the Company, as instructed by the Company, you must properly pack the 

Product or part—the Company is not responsible for damage in transit. The Company reserves the right to utilize reconditioned, refurbished, 

repaired or remanufactured Products or parts in the warranty repair or replacement process. Such Products and parts will be comparable 

in function and performance to an original Product or part and warranted for the remainder of the original warranty period (or such longer 

period as may be required by applicable law).
Company reserves the right, in its sole discretion, to refund the money actually paid by you for the Product.    If the Product or component 

is no longer available, replacement may be made with a similar product of equal or greater value, at Company’s sole discretion.  This is 

your sole and exclusive remedy for breach of this limited warranty.

Exclusion of Damages: THE COMPANY’S OBLIGATION TO PROVIDE REPLACEMENT PARTS, OR REPAIR OR REPLACE, AT THE 

COMPANY’S OPTION, SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY AND THE COMPANY’S 

SOLE AND EXCLUSIVE OBLIGATION. THE COMPANY SHALL NOT BE LIABLE FOR INCIDENTAL, INDIRECT, CONSEQUENTIAL OR 

SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE PRODUCT, ITS USE OR PERFORMANCE

.

Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may 

not apply to you. This warranty gives you specifi c legal rights, and you may also have other rights, which vary from jurisdiction to jurisdic-

tion.  The disclaimers, exclusions, and limitations of liability under this warranty will not apply to the extent prohibited by applicable law.
This warranty covers only replacement or repair of defective Products or parts thereof at the Company’s main facility and does not include 

the cost of fi eld service travel and living expenses.
Any assistance the Company provides to or procures for you outside the terms, limitations or exclusions of this limited warranty will not 

constitute a waiver of such terms, limitations or exclusions, nor will such assistance extend or revive the warranty.
The Company will not reimburse you for any expenses incurred by you in repairing or replacing any defective Product, except for those 

incurred with the Company’s prior written permission.

How to Obtain Warranty Service

: To qualify for warranty service, you must (a) notify the Company at the address or telephone number 

stated below within seven (7) days of discovering the covered defect, (b) give the model number and part identifi cation and (c) describe the 

nature of any defect in the Product or part. At the time of requesting warranty service, you must present evidence of the original purchase 

date. If you cannot provide a copy of the original written limited warranty, then the terms of the Company’s most current written limited 

warranty for your particular product will control. 

PRODUCT SPECIFICATIONS

All illustrations and specifi cations in this catalog are based on the latest product information available at time of production.  Broan-NuTone, 

LLC and BEST® reserves the right to make changes at any time, without notice, in prices, colors, materials, equipment, specifi cations and 

models, place of manufacture and to discontinue models or equipment.
Best

Broan-NuTone, LLC- 926 W. State Street, Hartford, WI 53207

1-800-637-1453

Best®, 550 Lemire Blvd., Drummondville, QC, Canada (1-866-737-7770) www.bestrangehoods.com

Summary of Contents for CC34IQSB





















































Reviews: