26
braKe Knob replacemenT
replaCing the brake knob
A.
remove Allen Bolts (57) and Washers (48) to disassemble the brake
assembly.
B.
While holding nut (53) with a wrench, loosen Brake Knob (17) by hand.
C.
remove Acorn Cap nut (55), nut (53), Brake Adjustment nut (35),
rubber Spacer (18), Brake Knob (17) and Brake Screw (51) one at a time.
d.
replace Brake Knob (17) then insert Brake Screw (51) into the new
Brake Knob (17) and insert them into the mainframe.
e.
replace rubber Spacer (18), Brake Adjustment nut (35), nut (53) and
Acorn Cap nut (55).
f.
Tighten nut (53) with a wrench while holding onto Brake Knob (17) by hand.
Make sure Acorn Cap nut (55) is properly secured.
g.
Install the brake assembly onto the mainframe using Allen Bolts (57) and
Washers (48).
