20
seTTing up Your bfsb5
plaCement in your home
To make exercise a desirable daily activity for you, the BfSB5 should be placed in a comfortable
and attractive setting. This Spin Bike is designed to use minimal floor space and to fit nicely in your
home.
do not place or operate the BfSB5 outdoors.
do not place the BfSB5 near water or in a high moisture content environment.
It is highly recommended to place a dedicated equipment mat beneath your BfSB5.
A dedicated mat provides superior stability and firmness for a proper workout.
leveling the bfsb5
The front and rear Base levelers (4) can be
adjusted to balance the level the BfSB5.
To adjust the level of the BfSB5,
rotate front or rear Base levelers (4) so
they are at floor level.
once the BfSB5 has been balanced, secure
levelers (4) by locking nut (53) located above
each leveler (4) as shown.
moving the bfsb5
This Spin Bike is easy to move around safely.
To move the BfSB5:
A. grasp handles (d).
B. Carefully pull handles (d) towards you
while pushing the front of the Spin Bike
downward.
C. Simply roll the BfSB5 on Wheels (12)
to the desired location.
d. When the destination has been reached,
gently lower the Spin Bike into position.
13
NOTICE
1.
Inspect all the Nuts, Nut Caps and Pedals in safe situation regularly and inspect the Equipment
periodically. While you find any defective parts, replace them immediately. Don’t exercise until they
are repaired well.
2.
Pay more attention to easy damage parts. As the following figure, please inspect the Brake pad
cowhide (15) to see if it falls off or is not work before exercise. If it is, please replace it.
3.B
efore exercise, please inspect the Pedal to see it is loose or not, please repeat installation Step 2 if it is.
4.
Please adjust the Hexagon Nut by using the Opening Spanner if the Seat is loose.
6. If you need to move the bike, please grasp the Handlebar (D) at their very ends to make the Pulley (12)
of Front Base stand on floor, then the bike could be moved easily.
20
ADJUSTING THE BASE LEVELER
STEP 1. When you find that the spin bike is not balance on the floor, should adjust one of the Base
Leveler (4), which is higher or lower than the others, to the same level to match the floor and the other
Base Leveler, to reach a balance effect of the spin bike. Then use an opening wrench to lock up the
Hexagon Nut (53) and the Front Base (E) & Rear Base (F).
-END-