Best Fitness BFRB1, Owner'S Manual

Page: 22 / 52

22
Be careful to assemble all components
in the sequence they are presented.
A. Connect Pulse Wires (#26 & #30) together.
B. Connect Sensor Wires (#28 & #31) together.
C. Insert Tension Cable (#27) through upright (M) and out from the opening on
upright (M)
d. Attach Tension Knob (#23) to Tension Cable (#27) as shown in diagram 1.
Push Tension knob (#23) towards Tension Cable (#27) as show in diagram 2.
Pull the Tension Cable (#27) up as shown in diagram 3, then seat it in the slot.
Pull out the Plastic Stopper (#74) as shown in diagram 4.
e. Secure Tension Knob (#23) to upright (M) using:
one m5 curved Washer (#24)
one m5x55mm button head cap screw (#25)
f. Secure upright (M) to front Main frame (A) using:
four m8x15mm button head cap screws (#20)
four m8 curved Washers (#13)
s T e p
8
Warning
Do not force tension
cable During installation.
! !