8
s t e P
1
Be careful to assemble all components
in the sequence they are presented.
nOte:
Finger tighten all hardware first. wrench tighten at the end of step 1a.
some components may be pre-assembled. nylon lock nuts will not fully
screw onto bolts, they must be wrench tighten to fully go on.
1a. attach Brackets (c) to uprights (a & B) using:
12 - (#1) M8X20mm Button Head cap screw
24 - (#2) M8 Flat washer
12 - (#3) M8 nylon lock nut
