Air
Space
Truss
Shingles
1x6 Fascia
Felt
Paper
1x6 Gable Trim
1.
Gather (2) two 24" x 48" and (2) two 16-1/2" x 48" pieces of OSB sheathing.
Install these panels over the bottom 2x4 truss member. Secure with 7d sinkers.
2.
Notch panels around gable studs.
3.
Cut the first 24"x 48" panel to
meet the center of the 2x4 truss.
16-1/2" x 48" Sheathing
4.
Repeat to install loft
flooring at the other
end of the building.
Step 16 Install Loft flooring
2.
Install shingles according to the instructions on the wrapper. If you need more
detailed instructions on installing shingles, there are good publications at book
stores or newsstands.
Install Roofing —
Not Supplied in Kit
1.
Install metal roof edging perimeter of the roof
area. If you are not installing shingles at this time,
you can purchase felt paper to protect the roof
sheathing. Install the felt paper before you install
the metal roof edge.
Building Tip: Install ridge vent in lieu of
shingles caps. Ridge vent provides ideal
ventilation, preventing heat and moisture from
damaging your building or its contents.
