1x6 Fasica
2x4 Truss
Roof Sheathing
Step 15 Install Roof Sheathing
1.
Cut a 73-1/2" long 1x6 fascia board to fit flush with the trim
on the gable and meeting the center of the truss. Install the
fascia so the bottom edge of the roof sheathing will rest on
the edge. See detail below. Use 8d galv. nails.
2.
Install a 48" x 72" roof panel on the lower
right corner. Use 7d sinkers, spaced 12" apart.
3.
Install a 48" long roof panel at the
top. The top sheathing will be 1"
below the peak of the trusses.
6.
Install 1x6 fascia and roof
sheathing at the back of
the building.
Cut 1x6-50"
To Length
4.
Cut and install a 50" long 1x6 trim board flush with the gable trim on the left gable.
5.
Install the remaining roof sheathing.
48" x 48"
31-1/2" x 72"
48" x 72"
31-1/2" x 48"
