24"
Right Sidewall
Back Wall
Right Gable
1x4 T
rim
Inside of Building
Detail 'B'
Right Gable
21-3/8"
1.
Install the gable on the right sidewall. The
gable siding will extend over the 1x4 trim
on the lower wall. Secure gable to wall by
nailing through the gable blocks with 10d
sinkers.
2.
Nail siding along the 1x4 trim board with
6d galv. nails.
3.
Install the left gable.
1.
Layout the truss spacing by placing 'X' marks where the trusses will be located. Measure from
the inside face of the gable when marking the location of the first truss. Important: When
marking the back wall, place the 'X' mark on the same side of the line so your trusses are
parallel when they are installed.
Step 10 Install Gable on Right Sidewall
Step 11 Install Trusses
2.
Using 1-1/2" hanger nails, install metal hangers to the 2x4 tie plate on the front wall.
The opening should line up with the 'X' mark, the bottom of the opening, flush with the
2x4 tie plate.See Detail 'B'.