6.
Assemble the loft doors. The loft door frames are
temporarily held together with corrugated fasteners,
this is the back side of the door frame. Place the
doors on level surface, face side down. Cut the siding
from above step to the size of the door frame. Secure
the siding panel to the frame with 1" screws provided.
24-3/4"
Step 4
Assemble Roof Gable With Loft Doors
1.
Assemble another gable frame. Create an opening
for the loft doors by installing a 36" long 2x4 between
the gable studs. The opening height should 24-3/4"
from the bottom 2x4 truss member.
36" Long 2x4
34-1/4" Long
Gable Stud
3.
Cut a 4x8 siding panel in half for the center siding. Cut top flush with the gable frame.
5.
Nail siding on the gable.
Use 6d galv. nails.
4.
Cut siding from the loft door opening, flush with the edge of the opening.
If you don't need loft access from the outside, attach loft door frames to
the gable to create a decorative look and weather tight storage area.
Supplied in Kit
2.
Turn gable over.
1"x4" Drive-on Plate
38" Long Gable Rafter
47 Long Gable Rafter
