This material is packed in door carton.
Step 8
Set Walls Panels
2.
Secure wall panels together at the corners. Use (4) four 10d coated nails per corner. Nail
wall panels to the floor. Nail through the bottom plate. Space 10d sinkers 24" apart.
3.
Install the 67-1/2" door header between the sidewall panels. Nail through the wall stud
into the ends of the header. Toenail into the top wall plates. Door trim will hide where
the siding panels butt together.
4.
Install 2x4-6' boards at both sides of the door openings to hold the walls straight.
2x4 Door Header
Sidewall Panels Without
Door Opening
1.
Nail (2) two 35-1/2" long 2x4 together
with a OSB filler panel between them.
Use 10d sinkers.
35-1/2" Long 2x4
OSB Filler
67-1/2" Door Header
5.
Install the door header, assemble above, between the front wall panels. Nail through the wall
stud into the ends of the header. Toenail into the top wall plates. Door trim will hide where the
siding panels butt together.
6.
Install a siding panel over the door header. The siding will extend 3/4" below the door header.
Sidewall Panels With
Door Opening
Siding
Panel
BACK WALL PANEL
FRONT WALL PANELS
