1x4 Gable Trim
Siding Will Extend Below Trim
Step 15 Install Trim
1.
Install 64-1/4" long 1x4 gable trim flush with the top of the roof
sheathing on both end walls. Use 8d galv. nails
4.
Install (2) two 72" long 1x3 trim boards,
flush with the bottom of the siding, along
each side of the door opening. Use 8d galv.
nails. Tack these boards with a couple nails;
you may want to move the trim later when
you install the doors.
5.
Install a 72" long 1x3 trim board across the
top of the vertical trim.
2.
Install 75-3/4" long 1x3 corner trim, on the
front wall, flush with the face of the siding
on the end walls. Repeat for back wall.
3.
Install 77-1/4" long 1x4 corner trim, flush
with the face of the front wall trim. Repeat
for back wall.
75-3/4" Long 1x3 Corner Trim
77-1/4" Long 1x4 Corner Trim
