Installation Instructions for Wi-Q™ Technology 45HQ Mortise Locks
BEST ACCESS SYSTEMS
a Product Group of Stanley Security Solutions, Inc
Completing the installation
10
17
Install top cover
(inside escutcheon)
1 Connect the antenna to its mating connector.
2 Place the top cover against the door and above the fire
plate. Slide the top cover down toward the bottom
cover as shown in Figure 17.
Caution: As you slide the top cover onto the fire plate,
feed the antenna wire down into the bottom cover. Be
sure not to pinch the antenna wire on the bottom cover
as you slide the top cover into place.
3 Use two cover screws to secure the cover to the side of
the fire plate, as shown in Figure 17.
Note: Phillips Type 2 and T20 Torx options are available
for the cover mounting screws.
18
Install mortise case faceplate
1 Secure the mortise case faceplate to the mortise case
with the faceplate mounting screws.
2 Check the lock for proper operation.
Figure 16 Inside view of top cover
Top cover
Antenna wire
Figure 17 Installing the top cover
Inside of door
Wireless cover
Cover screws
Antenna wire
Figure 18 Installing the mortise case faceplate
Outside of door
Mortise
case
faceplate
Faceplate
mounting
screws
