BEST ACCESS SYSTEMS 1E Series, Service Manual

Page: 64 / 96

Service and Maintenance
5–14 E Series Service Manual
To reinstall the cabinet cylinder:
1. Make sure that the cylinder ring is positioned on the cylinder.
2. Insert the cylinder into the front of the cabinet door.
3. While holding the front of the cylinder in place, attach the lock
washer, if present, to the back end of the cylinder assembly so that
it is flush with the cabinet door.
4. Thread the nut onto the cylinder and tighten it to secure the
cylinder in the cabinet door.
5. For the 1E7D4 cylinder , reinstall the following parts (see page 2–5
for part numbers and drawings):
■
throw plug retainer
■
cam in the locked position (see page 5–16 for 1E7D4 cam
rotations).
For the 1E7E4 cylinder , reinstall the following parts (see page 2–6
for part numbers and drawings):
■
cam in the locked position (see page 5–17 for 1E7E4 cam
rotations).
■
cam driver
■
washer.
For 5E cylinders , reinstall the following parts, if present (see
page 4–2 and page 4–3 for part numbers and drawings):
■
plug throw
■
cam in the locked position (see page 5–18 for 5E cam rotations).
■
cam driver
■
stop plate
■
two washers.