background image

2

besseytools.com

TABLE OF CONTENTS

1. Safety Instructions

 .......................................................................................................................

2

2. Application

 .......................................................................................................................................

3

  2.1   SC110V, BC and BCS Models
  2.2   SC110D Model
  2.3   Bearing heater operating conditions
  2.4   Principle of Operation

3. Installation

 ........................................................................................................................................

6

4. Cleaning and Maintenance

 ...................................................................................................

7

5. Pyrometer

 ...........................................................................................................................................

7

1. Safety Instructions

WARNING!

  

These indicate potential risk of serious personal injury

CAUTION!

  

These indicate danger of damaging the heater or workpiece

WARNING!  

 

Induction heaters generate a magnetic induction field, which may affect or impair 

medical devices such as pacemakers or hearing aids, resulting in a high risk of serious 

bodily harm. Do not operate, or be within a suggested minimum distance of 5m (16ft) of 

the machine while wearing such devices.

 

Hot workpieces may burn. Use protective gloves when handling such workpieces 

(suitable up to 150°C (302°F). 

 

Do not operate an Induction heater in areas where there is a risk of an explosion.

 

Do not use the induction heater if the cord is damaged.

 

Proper maintenance and handling practices are critical. Failure to follow user manual 

can result in equipment failure, creating a risk of serious bodily harm.

CAUTION!

 

Sensitive electronic equipment (e.g. portable telephones, computers, watches, etc.) 

may be affected by the magnetic field and should not be used within the vicinity of the 

heater.

Summary of Contents for BC Series









Reviews: