12
4.1 Conditioning
4. INSTALLATION
4.1.1 Work Area Conditioning:
Make sure the work area is free of condensed water,
electromagnetism, strong air currents, pollution,
among others. The workplace temperature should
be between 10 ° C and 38 ° C, humidity should
be between 10% and 90%. Make sure of having
access to two 110V/60Hz grounded outlets.
4.1.2 Operator:
The operator must be properly qualified and
trained to install the laser system. Additionally, the
operator must have read this manual and be aware
of the risks involved when working with a category
4 laser or high voltage equipment.
4.1.3 Other adjustments:
Users must prepare the materials and supplies
needed, including: 8 liters of distilled water (you
can use ionized water as a second option) for the
Chiller, two (2) AC110V grounded electrical outlets,
a computer, a proper exhaust system, testing
materials, among others.
4.2 Installation
4.2.1 Laser Tube Installation
Open the rear cabinet door (where the laser tube is placed) and remove the top of the Laser tube mounts.
Attention:
do not move or adjust the bottom
parts of the laser tube mounts, because it could
affect the laser path significantly.
4.1.4 Machine Leveling:
The machine must be properly level. Use a
conventional spirit level to measure each side of the
working area (y-axis) and the working table (x-axis).
