18
To reacquire the lost signal, press and hold the
CH/+
button for 3 seconds to enter the sensor
search mode.
7.4 Reset Min/Max record
Note:
The minimum and maximum value of all channels will be cleared in the reset mode.
In normal mode, press (do not hold) the
MIN/MAX/-
key
,
the
MAX
icon will be displayed in
UV INDEX area. Press the
SET
key to view max values of rainfall (rate, 24h, week or
month) , OUT or Indoor temperature and humidity ,outdoor temperature and humidity(AT or
dew point).
Press the
MIN/MAX/-
key for three seconds(and the
CLR
character is flashing in time area) to
clear all max values. the rainfall, wind speed, wind gust, Out and indoor temperature and hu-
midity maximum values. The maximum values will now display the current values
）
.
Press the
MIN/MAX/-
key again (do not hold), the
MIN
icon will be displayed. Press the
SET
key to view min values of out/indoor temperature/humidity and outdoor (AT or dew point)
Press the
MIN/MAX/-
key for three seconds(and the
CLR
character is flashing in time area)
to clear all min values.(Indoor and out temperature and humidity minimum values. The mini-
mum values will now display the current values).
Press the
SNOOZE
key to exit the min/max checking and cleaning mode, return to normal
display mode.
7.6 Snooze Mode
If the alarm sounds, and you wish to silence the alarm, press the
SNOOZE
key, the backlight
will turn on. The alarm icon will continue to flash and the alarm will silence for five minute.
press any key (
MIN/MAX/+ ,SET, ALARM,C
) to permanently exit the
Snooze
mode.
7.7 Back light Mode
If the LED is off, Press the
SNOOZE
button once. The backlight will turn on for five seconds,
and if no operation is performed for three seconds, the backlight will turn off.
The backlight operation is different when operating on batteries to save power.
ADJUSTABLE BACKLIGHT BRIGHTNESS
There are 3 levels of brightness of backlight. When the backlight is on press SNOOZE key to
switch between the 3 levels.
When backlight is off, press and hold the
SNOOZE
key for two seconds, the backlight will
turn on permanently
To turn off the backlight at any time press and hold the
SNOOZE
key for two seconds, the
backlight will turn off (visible after 10 seconds).
Summary of Contents for RGT-SQ02
Page 15: ...Figure 15 ...
