1. Safety Precautions
Electricity can cause severe injuries even with low voltages or
currents.
Therefore it is extremely important that you read the follow
i
ng
information before using your high voltage insulation tester.
a. This Instrument must only be used and operated by a
competent trained person and in strict accordance with the
instructions. we will not accept liability for any damage or injury
caused by misuse or non compliance with instructions and
safety procedures.
b. This instrument must not be used on live circuits. Ensure
all circuits are de-energised before testing. see paragraph
for details of built-in warning features should your high
voltage insulation tester be connected to a live system.
c. Always inspect your high voltage insulation tester and test
leads before use for any sign of abnormality or damage. If any
abnormal conditions exist (broken test leads, cracked case,
display faulty etc ... ) do not attempt to take any measurement
or use the tester. Return your high voltage insulation tester to
your nearest distributor for service.
d. Your high voltage insulation tester has been designed with
your safety in mind. However, no design can completely
protect against incorrect use. Electr
i
cal circuits can be
dangerous and
I
or lethal when a lack of caution or poor safety
practice is used.
e. Pay attention to cautions and warnings which will inform you of
potentially dangerous procedures.
f. Your high voltage insulation tester has a live circuit warning
beeper. If it is connected to a live circuit, a rapid pulsating
bleep will be heard. DO NOT proceed to test and immediately
disconnect the instrument from the circuit. In addition your
tester will display the warning message.
-1-
