background image

12

13

Removing and refitting the cover

1-

2-

3-

•  Pay attention when you remove the cover, as fitting the cover 

is done in the opposite way.

•  The upholstery of the seat consists of 3 separate parts.

•  Refit the cover, using the previous instructions in 

reversed order.

Remove the back rest cover from the seat by open the velcro 

at the back, detach the elastic loops from the fixing hooks 

and pull the cover carefully from the surrounding rim of the       

back rest.

Remove the head rest cover by detaching the elastic loop 

from the fixing hooks and pulling the cover carefully from the 

surrounding rim of the head rest.

Remove the seat cover by detaching the elastic loops from 

the fixing hooks and pulling the cover carefully from the 

surrounding rim of the seat.

Removing the cover

Refit the cover

Cleaning instructions

•  The cover of the seat must be washed according to the 

instructions on the inside of the cover (20).

•  DO NOT use any aggressive cleaning agents; these may 

harm the construction material of the seat.

wash with similar colours

(20)

Warning: potential misuse

•  It is NOT ALLOWED to mount the seat in a front 

passenger seat WITH AN ACTIVATED AIRBAG.

•  DO NOT guide the car belt around the         

reclining handles.

•  DO NOT drive with the iZi Up FIX when any FIX indicators are 

NOT GREEN (21).

•  DO NOT use the 

seat without the 

3-point belt (22).

!

(21)

(22)

DON’T DRIVE!

DON’T DRIVE!

!

Summary of Contents for iZi Up FIX










Reviews: