7
12.Adjustment of front brace
Move the front brace outwards
by using the ratchet lever.
See fig. 12 so the front brace
presses tightly into the seat back.
See fig. 13. Adjust the ratchet to
tight/slack position using the knobs
at the top of the ratchet lever.
See red arrows on fig. 12a
Fig. 12
Fig. 12a
13.
Moving the mechanism outwards
pushes the front brace in against
the seat back and tightens the
seat belt. See fig. 13
This also provides stable mounting
of the child seat.
Fig. 13
14.
Tighten the anchor belts to their maximum.
15.
Check that the child seat has
been correctly mounted and is
properly secured with pressure
against the dashboard.
If not, repeat the procedure.
Fig. 14
R
ea
rw
ard
-fa
cin
g
in
fro
nt
se
at
T-0427 iZi COMBI X1 N F GB Mont 16-02-06 09:24 Side 7
