background image

As a basic principle, only build your 
summer house on a level surface. 
Check your foundation prior to assem-
bly!

Open the package and lay out all the 
pieces (in the garden) so that you can 
assemble them without great effort one 
after the other. This will make assem-
bly easier. Always provide an underlay 
to protect any pieces even when they 
are not painted. Use leftover wood pie-
ces from the packages.

The house key

You will 

fi

 nd the house keys on the 

side of the door 

fi

 xed with a screw. Re-

move them prior to the installation of 
the door to avoid damages.

IMPORTANT:

Please have a close look at the dra-
wing prior to assembly because this 
is the only way to visualise where the 
individual components need to be 
placed during assembly.

(We recommend using a cordless 
screwdriver for fixing the screws. You 
should only fix window and door fittings 
manually with a screwdriver.)

Set the two preassembled 

fl

 oor  ele-

ments upside down on the foundation. 
Push the two 

fl

 oor elements together 

so that groove and tongue are closed 
in the centre. Make sure both pieces 
are 

fl

 ush on the sides.

S

TEP

 1

Before you begin!

S

TEP

 2

Assembling the floor

We are not responsible for damages during assembly!

2

Summary of Contents for Pavilion Octagon









Reviews: