In our example the individual roof are-
as are already shingled, which means
you only need to attach some small
pieces of roof felt to the roof edges
(ridge).
Cut off the individual pieces from the
provided shingles with a knife. Make
sure the pieces get narrower from the
black adhesive surface to the back.
Cut off several pieces in advance be-
cause you will need a number of shin-
gles for the roo
fi
ng of one ridge.
Start at the bottom of the eave and lay
the
fi
rst shingle centred on the ridge
(roof edge) so that half of the shingle
covers each side. Nail the shingle to
the roof using two roo
fi
ng nails in the
upper half of the shingle. Place the
Insert the window handle into the
lock in the window. Use a cordless
screwdriver or a screwdriver to screw
in the uppermost screw. Be careful
not to overtighten it if you work with a
cordless screwdriver. You can screw
in the bottom screw after opening the
window since the window handle will
not get in the way anymore.
Check all functions of the window as
soon as you are done.
Now take the metal mount for the door
handle and
fi
t it in. Make sure you
fi
x it
with a screwdriver because the screws
will be screwed in plastic nuts and they
may be easily overtightened. Please
be careful.
S
TEP
5
Attaching the handle sets
S
TEP
6
Completing the roofing
Watch a video on assem-
bly and alignment at www.
bertsch-holzbau.eu under the
menu item Video.
We are not responsible for damages during assembly!
6
