Berthoud BOXER II 3000 A, Manual

Page: 28 / 48

28
HEIGHT OF THE BOOM
- 50 cm to 80 cm above the surface to be treated depending on the spray angle of the nozzles and their
spacing.
- If the boom is higher, there is a risk of drift.
STIRRING
- Hydraulic stirring permite obtain the production of homogeneous mixtures in the tank, before and during the
spraying operation.
- Refer to the paragraph "Liquid stirring" (page 24) for valves positions.
FOAMING INTO THE TANK
- If this occurs, reduce the engine speed or add an anti-foaming additive to the contents of the tank when
filling.
- Do not add fuel oil to the spraying mixture as an anti-foaming agent.
LAST FILLING OPERATION
- When filling the tank for the last time, add only the amount of water and chemical necessary to spray the
remaining area.
DRAINING THE TANK
- The drain valve is located under the tank. Simply pull the cord (1) to open the drain orifice (figure 15). The
user is completely safed.
- You can also drain liquid from the tank into another one. (See page 54, paragraph "Transferring").