www.universal.bertazzoni.com
18
6. COMPLETING THE INSTALLATION
2 x
6 x 2 x
6 x
2 x
6 x
6
.1 Anti-tipping safety assembly
If the appliance(s) is not connected through
the side profile trims to secured cabinetry
you must install the anti-tip brackets to en-
sure the product does not fall forward dur-
ing use and cause damage or injury. Failing
to secure the appliance(s) securely will void
any warranty claim attributable to a tipping
situation.
Operate as follows:
>
The brackets should be applied as illustrated us-
ing the provided screws If using the anti-tip brack-
ets, lag into wood framing or concrete - drywall will
not hold the weight of appliance.
Place a bracket on the top of the appliance in corre-
spondence to the fixing holes and against the wall
[ 1 ]
.
>
Drill the wall with an
3/8” (
8 mm) bit and insert
the expansion plug
[ 3 ]
.
>
Reposition the brack
et and fix it fir
st to the cabi-
net and then to the wall
[ 4 ]
.
In order to use the anti-tip brackets on the
top compressor models, it will be neces-
sary to temporarily remove the top, metal
ceiling / shield to access the bolting points
for the brackets./ shield to access the bolt-
ing points for the brackets.
152 (6”
)
59
(2
3⁄8
”)
45 (1
5⁄8
”)
1
>
Mark up the holes position on the wall
[ 2 ]
.
2
3
4
