www.universal.bertazzoni.com
14
4. PANELS MOUNTING
4.
4
Mounting panels to the door and
the drawer of Integrated units
Operate as follows:
>
Ensure the top adjustment L-brackets are alig-
ned and inserted into the cavities at the top of the
door
[ 6 ]
.
>
At this point, alignment between the panel and
adjacent cabi-nets can be adjusted using the ali-
gnment brackets and small brack-ets
[ 7 ]
and
[ 8 ]
.
>
Vertical alignment: tighten or loosen the screw in
the brackets to raise or lower the panel
[ 9 ]
>
Depth alignment: working from the inside of the
door, after lift-ing up the magnetic seal, adjust the
panel position so it is closer to or further away from
the door using the holes
[ 10 ]
and then fix the panel
in position using the holes
[ 11 ]
.
Once the front panel has been ad-justed,
check that the gasket has been repositio-
ned correctly to as-sure the door/drawer
are closing correctly and avoid operational
er-rors of the unit.
Français
6
Français
7
8
Français
9
Français
10
11
