17
EN
Once the appliances have been adjusted and properly
levelled, loosen the two screws holding the sealing plate
in position.
Lower the plate until flush with the floor, and retighten
the screws. This will ensure optimized airflow
through
the condenser necessary for proper operation
[ 3 ]
.
> Next join them at the front attaching the
plastic
connecting brackets with the supplied screws
[ 4 ]
.
Attach
the bracket on top of the units (i
f
applicable) as
per
figure
[ 5 ]
.
> Finish off by mounting the central profile cover onto the
central profiles, by pushing it until a click is heard
[ 6 ]
.
> Once completed, push the units into their final position
[ 7 ]
.
Always mount front panels on door before pushing the
unit into its final position inside the cutout or structure.
> Check the levelling of the appliance, adjusting its feet
and wheels to correct it.
> Secure the appliance to the adjacent cabinets by fixing
to these the side profiles trims factory-installed on
the appliance
[ 8 ]
. To make this operation easier
keep the door open.
> Mount the covering frames onto the profiles, first insert
them laterally and then push firmly until a “click” is heard
[ 9 ].
Take care as appliances will be frontheavy
and may tip before they are secured to
the adjacent furniture.
C
A
B
B
A
A
A
Side and central profiles mounting:
A
- plastic connecting
brackets
B
- Profile trim cover (side)
C
- Profile trim cover
(central).
Appliance
Wall or furniture
7
8
9
6
