10
USE AND CARE INFORMATION
For Best Results
Start the rangehood several minutes before cooking to develop proper airflow. Allow the
rangehood to operate for several minutes after cooking is complete to clear all smoke and
odors from the kitchen.
Rangehood Control Panel
All controls are located on the right side of the rangehood.
Light On/Off Switch
TheOn/Off switch for the led light is located behind the front trim. Moving the switch to the 1
Position turns the light On. Moving the switch to the 0 position turns the light off.
Blower Speed Switch
B in FIGURE 10
shows the speed control switch for the blower. Moving the switch to the 1
Position turns the blower on LOW. Moving the switch to the 2 Position turns the blower on
MEDIUM. Moving the switch to the 3 Position turns the blower on HIGH. Moving the switch
to the 0 Position turns the blower off.
Automatic Operation
As long as the blower and light switches are on, the blower and light will automatically operate
when the visor is opened and shut off when the visor is closed.
proper airflow. Allow the unit to operate for several minutes
The metal grease filters should be cleaned frequently in hot
scratch rangehood finishes and should not be used to clean
finished surfaces.
FIGURE 10
lamp. Replace the light support and fix it into place
to the bulb and pull firmly down on the bulb and replace
�
�
�
�����
�
�
�
�
�
�
�
�
The grease filters are removed by pressing the handle on
the right side of the filter
make sure that the filters are properly positioned with
filters, one in the slide out part of the hood, the other in
B
