INSTALLING THE DISHWASHER
Step 11 Wiring Connections
Before connecting the power cable to the dishwasher, make sure the circuit breaker is off.
In the junction box located at the front bottom right of the dishwasher, find the three power wires
from the dishwasher including the grounding line.
Pass the power cable through the strain relief, and then into the junction box (Figure 14).
Connect the black wire of the dishwasher to the black wire of the power cable by inserting both
into a wire nut and then rotating the wire connector as shown in Figure 15.
Connect the white wire to the white wire and the green to the green in the same manner.
Recheck each wire to ensure it is connected correctly and securely.
Each colored wire should be connected to the corresponding wire of the same color.
White should be connected to white, black to black, and green to green.
Replace the junction box cover on the dishwasher.
1.
2.
3.
4.
5.
6.
Electrical Shock Hazard
To avoid electrical shock, do not work on an energized circuit.
Doing so could result in serious injury or death. Only qualified
electricians should perform electrical work. Do not attempt
any work on the dishwasher electric supply circuit until you are
certain the circuit is de-energized.
Fire Hazard
To avoid a fire hazard, make sure electrical work is properly
installed. Only qualified electricians should perform electrical
work.
Recheck each wire to ensure it is connected correctly and securely.
Each colored wire should be connected to the corresponding wire of the same color.
Power cable
Junction box
Strain relief
Black to black
White to white
Green to green
(Ground to ground)
22
Summary of Contents for DW18PR
Page 1: ...Ü DW 18PR ...
