Step 8 Leveling The Dishwasher
1. Open the door and place the level against the top of the tub on the inside
and check if the the dishwasher is level.If it is not level, rotate the leveling
legs at the bottom front of the dishwasher until the dishwasher is level.See
the first note below for instructions on adusting the height of the front legs.
2. Use the level to check if the dishwasher is level front to back, as shown in the
figure to the right.If the dishwasher is not level front to back, adjust the height
of the rear leg until the dishwasher is level.See the second note below for
instructions on adusting the the rear leg.
3. Open the door of the dishwasher and
check if both the
tub and door clearances
are correct.If not, rotate the
leveling legs on the bottom front of the dishwasher.
You can also check this by placing a level
against an
inside front vertical surface of
the tub.
If the leveling legs are rotated to the right (counter clockwise), they are
l
oosened
and the front of the dishwasher is raised. And the maximum
height be raised is about
1.968 in
. If they are rotated to the left (clockwise),
they are tightened and the front of the dishwasher is lowered.
Before you move the dishwasher for installation, make sure to adjust the height of the legs so
the legs are as short as possible. This prevents the legs from breaking. Level the dishwasher
by adjusting the height of the legs after you have the dishwasher in place.
When you prepare to move the dishwasher for installation, you should put your hand under the
, this prevents your hand from injuring.
17
base assembly of the dishwasher
Summary of Contents for DW18PR
Page 1: ...Ü DW 18PR ...
