WARNING
Bernstein safety systems are intended to protect operators
working at or near dangerous machinery. They can only
perform this function if they are correctly fitted to a suitable
machine. It is essential that the full contents of this manual
and all the authoritative documents referred to herein are
fully understood before any attempt at installation is made.
If in doubt contact your authorised Bernstein distributor.
The safety of persons and equipment cannot be guaranteed
if the muting controller is not used in accordance with its
intended use.
IMPORTANT
This manual must accompany the product throughout its
working life. Those persons responsible for the product must
ensure that all persons involved in the installation,
commissioning, operation, maintenance and servicing of the
product have access to all the information supplied by the
manufacturers of the machine and its safety system.
PLEASE OBSERVE THE FOLLOWING:
The device may only be installed and commissioned in compliance with these operating instructions
by suitably qualified personnel familiar with working safety and accident prevention legislation.
Electrical work may only be performed by suitably qualified electricians.
Repairs, in particular those involving opening the housing, may only be performed by the
manufacturer or persons authorised up by the manufacturer. Any attempt to perform repairs by
unauthorized persons will invalidate the warranty.
Please observe the relevant valid regulations, in particular those pertaining to safety measures and
the installation of muting sensors, the muting lamp and the Bernstein light curtain.
It must be possible to view the danger area from the installation location of the start button and the
key-operated switch.
It must not be possible to start the equipment from the danger area.
2
