Remember if you need help contact Customer Care: 1+ (619) 449-2392
|15
Cleaning the Water Pump’s Parts
Water Pump Air Filters
After about six weeks of usage, you may want to clean the Water Pump’s filter and
impeller to keep your Bernini™ Fountain in tip-top shape.
Water Pump Impeller
The impeller inside of the Water
Pump is what pushes water up
through your fountain, allow-
ing you to enjoy the soothing
sounds and wonderful sights of
your Bernini™ Fountain. After
long periods of usage, this
part will need to be cleaned to
make sure your fountain runs
optimally.
Step 1:
Remove the
front of the Water
Pump by grabbing
the sides of the front
panel and pull it off
the unit.
Step 2:
Remove the
impeller chamber
cover. This is tightly
fitted on to the impel-
ler chamber, but will
come off.
Step 3:
Remove
the impeller from its
chamber.
Step 4:
Rinse the
impeller until all debris
has been removed.
Then replace the
impeller in the impeller
chamber, put the
impeller chamber back
on and then replace the
pump’s front panel.
Begin by disconnecting the
pump from the Fountain Tier.
Step 1:
Remove the front of
the Water Pump by grabbing
the sides of the front panel
and pull it off the unit.
Step 2:
Pull the water
pump filter from the front
panel.
Step 3:
Wash the filters
under running water until
debris has been removed.
Then replace the filters
and pump’s front cover.
Please Note: If pump is
bubbling and or water is
not flowing or not flow-
ing properly, check that
the water pump impeller
chamber cover is pressed
on all the way.
