Setting up the machine
28
Using the single stitch/securing function with the handles
The «Single stitch/securing» funciton combines the following functions:
• Pull the bobbin thread upward with a single stitch.
• Sew a programmed number of securing stitches.
Prerequisite:
•
A button of the handles is programmed with «Single stitch/securing». (see page 26)
> To pull the bobbin thread up with a single stitch, briefly press down the button programmed with the
function.
> To sew the programmed number of securing stitches, press down the button programmed with the
function until the programmed securing stitches have been stitched.
2.5 Presser foot
Raising and lowering the presser foot
On the sewing screen
With handle button
(Frame model)
With foot control
(Sit down model)
or
or
Tap.
Press the button programmed with
«Raising/lowering the presser foot».
(see page 26)
With back kick, if the back-kick
function is programmed with
«Raising/lowering the presser foot».
(see page 24)
Changing the presser foot
> Raise the needle.
> Raise the presser foot.
> Switch the machine off.
> Raise the clamping lever.
> Pull the presser foot away in a downward direction.
> Insert a new presser foot into the bracket from below.
> Press the clamping lever down.
