Bernina BERNINA 560 Instruction Manual Download Page 64

Page: 64 / 192

Practical stitches

customizing stitch pattern individually

According to material and purpose a stitch pattern can be altered individually.

The alterations described here are applicable for all practical and many

decorative stitches.

temporary altered stitch memory

Any altered stitch width and stitch length is automatically saved.

example:

sew with an altered stitch (e.g. zig-zag)

select and sew another stitch, e.g. straight stitch

return to zig-zag, your alterations are still active

return to basic settings

Individual stitch patterns can be reverted to basic settings manually.

⦁

touch stitch width/stitch length icon and in the respective Display the

yellow-framed icon or

⦁

press the «clr»-button

►

any altered values of the

active

stitch return to basic setting

⦁

switch off the sewing computer

►

any alterations of all stitches are deleted

The personal memory is unlimited; it can hold as many stitch

alterations as needed:

Stitch length

Stitch width

Needle position

Mirror images

Thread tension

Balance

Pattern repeat 1-9x

034790.50.04 _2013-03_Manual_B560_EN

Summary of Contents for BERNINA 560

































































































































































































Search results

Summary of Contents for BERNINA 560

Reviews:

Brands by name

Popular brands

Bernina BERNINA 560, Instruction Manual

Search results

Summary of Contents for BERNINA 560

Reviews:

Brands by name

Popular brands