manualshive.com logo in svg

Bernina BERNINA 560, Instruction Manual

Share
Download
Bernina BERNINA 560 Instruction Manual Download Page 111

110

Combi mode

1

2

3

combi mode

The sewing-/embroidery computer has a memory system where both, the 

sewing and embroidery memories are saved.

In the sewing memory stitch patterns, lettering and numbers can be combined 

and saved.

In the sewing memory each «Drawer» can store a maximum of 70 stitch 

patterns as long as there is sufficient free space (capacity) available. If the 

storage space (but not all drawers) is full, there may be too many embroidery 

designs in the memory.

The memory is long-term, i.e. contents are kept until they are deleted. A power 

cut or switching off the sewing-/embroidery computer does not have any effect 

on the stored contents. 

creating stitch combinations

programming and saving

 

⦁

touch «Decorative stitch»-button 

 

⦁

select category

 

⦁

touch «Combi mode»-icon

 

⦁

select the desired stitch pattern directly or type in the number

 

⦁

make any alteration concerning stitch length, stitch width, needle position 

etc.

 

⦁

select another stitch pattern 

 

 

⦁

touch «Memory»-icon 

1

 

 

⦁

touch «Save»-icon 

2 

 

⦁

touch «Save»-icon 

3 

 

►

the combination is saved 

 

►

the Display closes

034790.50.04 _2013-03_Manual_B560_EN

Summary of Contents for BERNINA 560

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands