Bernina BERNINA 560 Instruction Manual Download Page 16

Page: 16 / 192

Important sewing information

correct needle/thread combination

When sewing, the thread should travel smoothly down the long groove on the

front of the needle.

too thin thread or too thick needle

The thread has too much clearance in the long groove. Skipped stitches and

damage to the thread can occur.

too thick thread or too fine needle

The thread rubs on the edges of the long groove and can get jammed. This

can cause thread breakage.

needles, threads

130/705 H-S/70

1 130

Shank length

2 705

Flat shank

3 H

Needle scarf

4 S

Needle point (here e.g. medium ball point)

5 70

Needle size (shank diameter)

Guidelines

Material and thread

Needle size

Light weight materials:

Fine thread (darning thread, embroidery thread)

70-75

Medium weight materials:

Sewing thread

80-90

Heavy weight materials:

Sewing thread (quilting thread, topstitching)

100, 110, 120

034790.50.04 _2013-03_Manual_B560_EN

Summary of Contents for BERNINA 560

































































































































































































Search results

Summary of Contents for BERNINA 560

Reviews:

Brands by name

Popular brands

Bernina BERNINA 560, Instruction Manual

Search results

Summary of Contents for BERNINA 560

Reviews:

Brands by name

Popular brands