Bernina activa 220, Owner'S Manual

Page: 14 / 198

Mastering
Your
BERNINA
®
BERNINA
®
/
bernette
® Sewing Machines
M
ASTERING
Y
OUR
BERNINA
®
/ bernette
®
S
EWING
M
ACHINE
8/05
14
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA ® Dealers
Fabric ...................................................... firm, woven fabric 4” x 6”
Stabilizer ............................................. lightweight tear-away, 4” x 6”
Needle .................................................................... 90/14 Universal
Thread .......................... 30 wt. cotton embroidery, contrasting color
Presser Foot ..................
BERNINA
®
Reverse Pattern Foot #1/1C
..........................................
bernette
®
Zigzag/Universal Foot
Stitch ................................................................................. straight
Needle Position ................................................................. as noted
Needle Positions
Fold fabric in half to 2” x 6”.
Select Straight Stitch.
Position the fold of the fabric on the 1” mark on the right side of
the stitch plate.
[Not available on
bernette
® 55 .]
Sew ½” (approximately five stitches). Stop with the needle up,
out of the fabric.
Move the needle one position to the left.
bernettes
® : Move ½ number to the left using the Stitch Width dial.
Stitch ½”. Stop with needle out of the fabric. Repeat until all left
needle positions have been stitched.
Leaving the fabric under the foot – move the needle position back
to center.
BERNINA
®
models only:
Move needle one position to the right. Stitch ½”. Note: On the
1008, avoid bending the needle by moving it up out of the fabric
before changing the needle position; this is not necessary on
computerized models, as the machine will automatically wait until
the needle is in the highest position before moving the needle.
Repeat this until all right needle positions have been stitched.
Note: If your machine has a Pattern Repeat function, activate
Pattern Repeat 1x, stitch until the machine automatically stops,
then adjust the needle position; repeat until all positions are sewn.
.