Bernina activa 220, Owner'S Manual

Page: 113 / 198

Mastering
Your
BERNINA
®
BERNINA
®
/
bernette
®
Sewing Machines
M
ASTERING
Y
OUR
BERNINA
®
/
bernette
® S
EWING
M
ACHINE
8/05 113
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA ® Dealers
Notes:
Owner’s manual: _____
BERNINA
®
Stitch Regulator
Changing BSR Soles
To remove a sole from the BSR foot, press the
release buttons (indicated in drawing at right by
red arrows) and slide the sole along the angled
grooves.
To attach a sole to the BSR foot, place it over
the angled grooves and slide it up until it clicks into place.
Installing the BSR Foot
Lower feed dog. Attach desired sole to BSR as instructed above.
Attach the BSR foot to the sewing machine.
Insert BSR plug into the green socket located
under the lower left corner at the back of the
machine (see sidebar).
aurora 430/440: The BSR symbol will
appear on left side of display screen, and presser foot icon will
indicate Foot #42 (BSR). Press the BSR/Balance button; Mode
1 or Mode 2 – whichever was used last – will be selected, with
stitch length set at 2.0 mm (if machine has not been turned off,
settings will automatically return to the ones last used with the
selected Mode). Stitch length may be adjusted from 1-4 mm.
artista 630/640/730: The BSR screen opens automatically
when plug is inserted into the socket. Mode 1 will automatically
be selected, with stitch length set at 2 mm. Stitch length may
be adjusted from 1-4 mm.
Select Mode 1 or Mode 2 by pressing the appropriate number
on the screen.
Note: For further information, see exercises on
pages 114-117.
Activate BSR and start stitching by stepping on the foot control,
or by unplugging the foot control and pressing the Stop/Start
button.
Note: A red sensor in the foot will glow when machine
is run in BSR mode.
To Easily Locate
the BSR Socket:
Try one – or both –
of the following tips:
• Look for its reflection – look
for the bright green!
–
in the
clear half circle on the Slide-
On Table (included with the
machine) or Clear Acrylic
Sewing/Quilting Table (optional
accessory). You may need to
lean away from the machine
to see the socket's reflection.
• Using the pointer finger of
your left hand, locate the socket
just to the left of the presser
foot bar. With the right hand,
insert the BSR plug into the
socket.