Bernina activa 220, Owner'S Manual

Page: 137 / 198

Mastering
Your
BERNINA
®
BERNINA
®
/
bernette
®
Sewing Machines
M
ASTERING
Y
OUR
BERNINA
®
/
bernette
® S
EWING
M
ACHINE
8/05 137
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA ® Dealers
Function Sampler - continued
Notes
Row 5
Pattern Begin,
Pattern Repeat 1-9x,
Pattern End
activa & aurora
• Select the satin stitch scallop or
satin stitch heart stitch:
220* ................ 32
230PE* .......... 48/46
240 ................ 58/55
430 ................ 88/76
440QE .......... 102/99
* Pattern Repeat is not available
on the activa 220 & 230PE.
• Begin sewing, then press the
Pattern End button. Continue
sewing; machine will stop when
stitch pattern is complete. Move
fabric forward about ½”.
• Press the mem button to open
Memory.
• Select pattern stitch and press
mem
↵ ↵↵ ↵↵
to enter it into memory.
Repeat two times for a total of
three pattern stitches in Memory.
• Begin sewing; machine automati-
cally starts at the beginning of the
programmed stitch sequence.
• activa: Continue stitching. Press
Pattern End; machine will auto-
matically stop
when entire stitch
sequence (3 scallops or hearts)
is complete.
• aurora: Continue stitching. Press
Pattern End; machine will auto-
matically stop
at end of current
stitch. Press and hold Pattern End
button until machine beeps. Sew;
machine will automatically stop at
end of entire stitch sequence.
artista
• Select stitch #602. When a
stitch is selected, the Pattern
Begin function is automatically
activated.
• Sew about 1½ stitch patterns;
touch the Pattern Begin icon,
move fabric forward, and stitch
another 1½ patterns.
• Touch the Pattern Begin icon
and Pattern Repeat 3x. Move
fabric slightly forward and stitch
until machine stops. On the
artista 730, notice that while
you stitch, the Pattern Repeat
function counts down the
number of pattern repeats left
to sew.
• Begin sewing again; while
stitching, touch the external
Pattern End button (above
Quick Reverse button on
artista
730) or Pattern End function
(located above sliding speed
control on
artista 640). When
selected, Pattern End stops
the machine at the end of the
current stitch pattern.
• Touch external CLR button
to cancel the active functions.