manualshive.com logo in svg

Bernina 740 Favorite, User Manual

Share
Download
Bernina 740 Favorite User Manual Download Page 118

Care and maintenance

116

12 Care and maintenance

12.1 Firmware

Checking the firmware version

The machine's firmware and hardware versions are displayed.

> Tap «Setup Program».

> Tap «Machine Settings».

> Tap «Information».

> Tap «Machine Data».

Checking the firmware version

The firmware and hardware versions of the machine and the connected embroidery module are displayed.

> Tap «Setup Program».

> Tap «Machine Settings».

> Tap «Information».

> Tap «Machine Data».

Updating firmware

The latest firmware of the machine and a detailed step-by-step instruction for updating processes can be

downloaded at 

www.bernina.com

. In general, personal data and settings are automatically transferred

during a firmware update. For reasons of safety, it is also recommended to save data and settings on a
BERNINA USB stick before the firmware update is started. If personal data and settings should get lost during
a firmware update, they can be transferred to the machine again afterwards.

> Insert the USB stick with the new firmware version into the machine.
> Tap «Setup Program».

Summary of Contents for 740 Favorite











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands