Wood Deck Panel
Wood Deck Panel
Loop or Panel
End Support
Loop or Panel
End Support
a.k.a. overhead loop support
and tower deck assembly
IMPORTANT NOTES
Failure to install product according to installation instruction will result in loss of warranty.
Cartons contain all hardware required for assembly.
Drill Fixture
Mod-eez® Post Sex Bolts
Deck Assembly Instructions Using a Loop/Panel Support and a Tower
The illustrations here show the assembly
process for connecting a loop or panel
support end and a tower to a wood
deck panel.
Mod-eez® clip installed into the end of the
wood deck panel.
2 Mod-eez® post installed in wood loop
(this could also be a veneer panel end).
Attach loop support to deck panel by
aligning posts in loop with clips in panel
and then sliding loop upwards until the
posts fully engage.
Mod-eez® clip installed into the end of the
wood deck panel.
When posts are fully engaged the top of
the deck panel will align with the top of
the loop support.
Support panel should fit tight and square
to the wood deck panel.