background image

EXPRESS DUAL • ED2000

© Bernhard and Company Limited

32

EXPRESS DUAL • ED2000

© Bernhard and Company Limited

33

Ref #     Name of Part

 

Qty.          Part #

TRAVERSE ASSEMBLY 

__________________________________________________

   1         Forkdriver (only) ......................................................................1               A9512
              Forkdriver c/w bushings & seals .............................................1               A9505
   2         Shaft for Forkdriver .................................................................1               A9050
   3         Ball Bushing for Forkdriver......................................................2               A7706
   4         Dust Seals for Forkdriver ........................................................2               A7707
   5         Socket Screw M6 x 6...............................................................2               A5156
   6         Shaft for Pick up......................................................................1               A9183
   7         Traverse Pick Up .....................................................................1               A9518 
   8         Ball Bushing for Trav. Pick Up.................................................2               A7702
   9         Dust Seal for Trav. Pick Up .....................................................2               A7703
  10        Hex. Head Screw M12 x 25.....................................................2               A5712
  11         Washer M12 ............................................................................2               A5315
  12        Engagement Screw.................................................................1               A6112
  13        Lobed Knob M12 .....................................................................1               A6102 
  14        Reversing Bar..........................................................................1               A4111
  15        Reversing Bar Stop .................................................................2               A4113
  16        Cross Knob M8 x 15................................................................2               A6131
  17        Microswitch..............................................................................1               A8111
  18        Housing for Microswitch .........................................................1               A8113
  19        Guard for Microswitch .............................................................1               A6382
  20        Screw 2BA x 1 3⁄4”....................................................................2               A5404
  21        Traverse Motor  .......................................................................1               A6022
  22        Idler Sprocket ..........................................................................1               A7609
  23        Oilite Bush for Sprocket ..........................................................1               A7704
  24        Spindle for Idler Sprocket........................................................1               A9057
  25        Drive Sprocket.........................................................................1               A7603
  26        Traverse Chain ........................................................................1               A7406
  27        Link for Traverse Chain ...........................................................1               A7502
  28        Circlip 1⁄2” .................................................................................1               A5602
  29        Hex. Nut M10...........................................................................1               A5503
  30        Socket Screw ..........................................................................1
  31        Hex Head Screw M6 x 18........................................................4               A5719
  32        Washer M6 ..............................................................................4               A5320
  33        Capacitor  3uf for Trav Motor ..................................................1               A8148
  34        Friction Spring for Rev Bar......................................................1               A6746
  35        Socket Screw 1⁄4”Whit x 1⁄4”......................................................1               A5101

9.    Parts List

Summary of Contents for EXPRESS DUAL ED2000









































Reviews: