47
Bartack
Stitch pattern:
Mode 2 :
29
Thread tension:
3 - 6
Presser foot:
Satin stitch foot
The bartack is used to reinforce pockets, crotches and belt carri-
ers where extra strength is needed.
•
Starting to sew
Start the machine and sew until the machine stops automatically.
The machine will sew a bartack 5/8
˝
(1.5 cm ) long.
5/8
˝
(1.5 cm)
The machine will trim the threads at the end of sewing auto-
matically if the thread cutter sign is indicated on the
LCD display (Refer to page 13).
•
Sewing shorter bartack
* Set the slide speed control at low speed setting.
To sew a bartack shorter than 5/8
˝
(1.5 cm),
fi
rst stop the
machine after sewing the required length , then press the
reverse sewing button .
The bartack length has been determined.
Start the machine again and continue sewing until the machine
stops automatically.
Required length
Reverse sewing button
Bartack length
Starting point
•
Sewing a same-sized bartack
Simply start the machine to sew another bartack at the same
size.
Eyelet
Stitch pattern:
Mode 2 :
30
Thread tension:
1 - 4
Presser foot:
Satin stitch foot
The eyelet is used for belt holes etc.
•
Starting to sew
Attach the satin stitch foot F.
Start the machine. The machine will stop automatically when
completed.
The machine will trim the threads at the end of sewing auto-
matically if the thread cutter sign is indicated on the
LCD display (Refer to page 13).
Open the eyelet with an awl, eyelet punch or pointed scissors.
•
Adjusting the shape of an eyelet
Correct the shape of the eyelet as follows:
Press the stitch length button
to change the eveness.
If the eylet open , press the “ “ button to make the darn even.
(L1–L2)
If the eylet overlaps , press the “
“ button to make the darn
even. (L4–L5)
PLEASE NOTE:
The shape can be adjusted within L1 to L5 (default setting
is L3) .
