25
Setting Mode
To enter the setting mode, press and hold the memory button
and turn the power switch on until the setting mode screen
appears.
In this mode you can set the following machine functions.
•
Buzzer sound setting
The buzzer sound can be turned on or off using the buzzer
sound setting.The default buzzer sound setting is “ON”.
Enter the setting mode.
To turn off the buzzer sound, press the cursor. The “oF”mark
will blink. Press the memory button to turn the buzzer sound
off.
* Caution buzzer sound cannot be turned off.
•
Permanent needle stop position setting
You can set the needle stop position to up or down when the
machine stops.
Enter the setting mode. Press the mode button to enter the
up/down needle position setting.
The default up/down needle position setting is “dn”.To
change the needle position, press the cursor. The “UP”
mark will blink.Press the memory button to change the up/
down needle position to “UP”.
•
QPKK¦PEIAN
The machine will be turned off if you do not use the machine
within the time period set by this timer.
The auto-off timer can be set from 1 to 12 hours.
The default auto-off timer setting is 7 hours and “07” sign
appears on the screen.
Enter the setting mode. Press the mode button 2 times to
enter the auto-off timer setting.
Press cursor to increase or decrease the setting value.If
you wish to turn off the timer, press and hold the cursor but-
ton until “oFF” sign appears on the screen.
Press the memory button to apply the setting.
PLEASE NOTE:
The auto-off timer is available in EU countries and some
regions which use 200 - 240 voltage standards.
