Decorative stitches
55
2020-09 EN 5220105.00A.04
Stitch pattern
Stitch
category
Name
Description
Recommende
d presser foot
Stitch
length
Stitch
width
K
Decorative
stitch
For decorative effects.
Zigzag foot
S2
6,0
5.2 Altering the stitch density
When using the satin stitch, the stitch density can be adjusted by changing the stitch length. A short stitch
length means that the distance between stitches is shorter and the stitch is denser. A longer stitch length
means that the distance between stitches is greater and the stitch is less dense.
> Set the stitch selector to «K».
> Adjust the stitch length.
> Adjusting the stitch length changes the stitch density.
5.3 Gathering stitches
Gathering
Ideal for delicate and medium-weight fabrics. For decorating clothing or decorative items.
> Fit the zigzag foot.
> Set the stitch pattern selector knob to position «A».
> Set the stitch width to «0».
> Set the stitch length to «4».
> Set the needle position to «Center».
> Set the thread tension to «2» or less.
> Pull out around 5 cm of the upper thread and bobbin thread.
> Sew along the fabric edge at a distance the same as the width of the foot. At the start, make a few
reverse stitches to sew it up. Leave the protruding ends of the thread around 10–12 cm long.
> Sew additional lines at a distance of approx. 5 mm. At the start, make a few reverse stitches to sew it up.
Leave the protruding ends of the thread around 10–12 cm long.
> Pull the bobbin threads and distribute the folds evenly.
Smocking
Decorative stitches that are sewn over ruffles are referred to as smocking. This technique is used to decorate
blouses or cuffs, among other purposes. Smocking gives fabric texture and elasticity. The following stitches
are suitable for smocking:
• Honeycomb stitch (S1, C)
• Faggot stitch (S1, G)
> Fit the zigzag foot.
> Set the stitch pattern selector knob to position «A».
> Set the stitch length to «4».
> Set the thread tension to «2» or less.
> Sew a tacking stitch 1 cm away.
