background image

 

S 201                                                                                                                                                                                                                  01-07

 

7

Instruction manual 

 

Dear customer! 
Congratulations on the purchase of this product. 
This garage door operator has been developed according to state-of-
the-art technology and manufactured using the most reliable and high 
quality electrical / electronic components. 
We point out that this instruction manual is being released without 
any warranty. We reserve the right to make changes or modifica-
tions on the equipment and on this manual at any time without 
giving any prior notes. 

 

Please keep this instruction manual in a safe place 
near the garage door opener. 

 

FOR THE SAFETY AND LIFE OF PERSONS IT IS  

ESSENTIAL TO FOLLOW ALL INSTRUCTIONS. 

 

Requirements for the garage and the door: 

 

The garage door drive should only be implemented for the 
automatic operation of spring-compensated swinging and 
sectional doors in the non-commercial sector. The recom-
mended max. door measurements are listed in the chapter 
Technical Data. The door has to be in accordance with the 
valid specifications (e.g. EN 13241-1, EN 12604 and EN 12605). 
Prior to installation of the operator the door must be easily 
operated manually. 
The opener is designed for operation in dry rooms. 
The garage ceiling has to be constructed in a way that a safe 
attachment of the opener is assured. 

 

General safety instructions 

 

Qualified and trained personnel with the following skills may only 
carry out installation, connection and startup of the operator: 

 

knowledge and application of the most recent EN norms 
in use. 

knowledge of the general and special safety and acci-
dent prevention regulations of the respective country. 

knowledge of the relevant electro-technical regulations 
of the respective country. 

 

Incorrect assembly may cause serious injury! 
Prior to all work on the operator, disconnect the mains plug (except 
in the case of test and programming processes). 

 

Fit photo cells if the garage door opener is installed with access to 
a public area. The photo cells must be checked in 6 month inter-
vals by qualified and trained personnel. 
 
Do not operate the garage door opener at all, until it is confirmed, 
that the garage door system is in accordance with the directive 
98/37/EC and a valid EC-Declaration of Conformity has been 
issued. 
 

Warranty: 

 

The manufacturer assumes no warranty and product liability if 
installation was incorrectly performed or any change was made to 
the drive without the latter’s prior consent. Mounting may only be 
performed according to the assembly guidelines. The mounting or 
additional use of other parts jeopardizes the safety of the drive and 
is therefore prohibited. 

 

Instructions for the installation of the operator 

 

Please check if the door mechanics is in a proper condition: you 
should be able to move the door very easy manually. 
In addition all mechanical locking devices at the door must be put 
out of action. 
Permanently mounted auxiliary devices (such as push buttons 
etc.) should be mounted within view of the door. The distance 
between moving parts and the height must be at least 1.8 meters. 
It is essential that they be mounted out of reach of children!  
Affix warning signs indicating the risk of been caught in the door 
where they may be seen immediately or in the vicinity of the per-
manently mounted push button.

 

 

 

 

 

 
An emergency release is required for garages without a second 
access. A function test of the emergency release has to be carried 
out monthly! 

 

The door can shut down much faster if the springs are weak, 
broken or damaged or if the counterweight is faulty. Under 
these circumstances using the emergency release may lead 
to uncontrolled movements of the door. 

 

Instructions for the startup of the operator 

 

Please inform all persons using the door system on how to operate 
it correctly and safely. Demonstrate and test the reversion (with a 
50 mm high obstacle at max. 150 N) as well as the mechanical 
release. 
Only operate the door if you have the entire door area in view. 
Always be sure, that no persons or objects are located within 
traveling range of the door. 
Wait until the door has come to a complete halt. Persons or vehi-
cles are only allowed to step in the door operating area, when the 
door is completely open and at a complete standstill. 
Do not permit children to play with the automated garage door! 
Transmitters are to be kept safe and away from children! 
Door, opener and eventually extra installed safety accessories 
have to be checked regularly. See also the chapter maintenance. 

 

Do not use the operator when maintenance or adjustment 
work is urgently required. A badly balanced door, or a faulty 
garage door drive may cause damage and injuries.

 

Summary of Contents for S 201-60

















Reviews: