Bernal S 201-60, Instruction Manual

Page: 10 / 16

S 201 01-07 10
Setting of force and path
Hint:
-
At first set-up of the opener (or after re-setting to the preset values) the opener switches automatically into
the programming mode.
-
If accidentally the end position got overstepped during the programming mode you have got the possibility
to reverse the path direction by carrying out the following steps
Press button S and keep pressed
Press button L additionally
If there is no door reaction: pull mains plug and reconnect after approx. 1 min, then start programming once more!
ATTENTION: DANGER:
During the automatic path programming of the opener the safety reversing
function or safety devices are not activated and the light is switched off!!