Intended use
-
Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values,
temperatures, calling up and saving light scenes, etc.
-
Touch sensor: Installation in double flush-mounted appliance box according to DIN 49073
-
Glass sensor: Glass sensor TS: Installation in double installation socket for glass sensor
(see chapter 6.3. Accessories)
Product characteristics
-
The pushbutton functions switching, dimming, controlling blinds, value transmitter, calling
up moods, etc.
-
Operation through touching the sensor buttons
-
LED to display status or actuation
-
Integrated room temperature sensor
-
Room temperature control with setpoint value specification
-
Display of room and setpoint temperature
-
Display of external temperature; in conjunction with external KNX temperature sensor
-
Display of day and time, in conjunction with KNX time encoder
-
Temperature limitation for floor heating; in conjunction with external temperature sensor
-
Integrated bus coupling unit
4 Operation
The operation of functions or electrical consumers can be set individual for each device. Two
operating modes are used:
-
Single button operation:
Switching on or off or dimming brighter/darker, e.g. of lighting, takes place alternately when
the same sensor button is pressed repeatedly.
-
Two button operation:
Two sensor buttons next to each other form a function pair. Pressing the left button,
for example, switches or dims lighting on or brighter, pressing the right one switches it off
or makes it darker.
Operating a function or load
Consumers such as lighting, blinds, etc. are operated using the sensor buttons (2) and such
operation depends on the programming of the device.
o
Press a sensor button.
The stored function is executed.
i
The actuation pulse is relative to the length of touch. Depending on the function, short and
long actuations may trigger different actions, e.g. switching/dimming.
Operating modes and display icons
The device compares the current room temperature with the setpoint temperature and controls
heating or cooling devices according to the current demand. The setpoint temperature depends
on the current operating mode and can be changed by the user, depending on the
programming. The operating modes and the current controller status are shown in the display.
Seite 2/13
15.02.2013
32586901
97-09635-000
KNX
Touch/Glass sensor 2gang / 3gang with room thermostat
