Berker 7531 40 18, Operating Instructions Manual

Page: 45 / 100

45
GB
Operation

Activate the bus mode (deactivate the permanent manual control
mode).
A disabled output can be operated in the manual control mode.
When a disabled output is selected in the manual control mode,
the respective status LEDs are flashing twice briefly at intervals.
Re-enabling the outputs
The device is in the permanent manual control mode.

Press the key briefly < 1 s several times until the desired
output is selected.
The status LEDs of the selected output A1...A8 are flashing
twice briefly at intervals

Press the
▲
and the
▼
key simultaneously for at least 5 s.
The selected output
A1...A8
is enabled.
The LEDs of the selected output are flashing slowly.

Activate the bus mode (deactivate the permanent manual control
mode).