Docking station
Page 2 /5
97-09895-000
02/2011
(4) Decrease volume
(VOL –)
(5) Increase volume
(VOL +)
(6) The device holder fixing screws
(7) Changeover switch of audio source
(ON/OFF)
(8) 3.5 mm stereo jack
(AUX)
3 Function
The docking station is used for connecting a mobile player such as iPod/iPhone* or MP3-Player
and enables the playback by the integrated stereo amplifier e.g. music by external playback
devices or directly by connected loudspeakers.
- Separate
Line out
output to the connection of external audio devices, e.g. flush-mounted
Radio
-
Battery charging function by means of 30pole plug connector for iPod/iPhone*
-
Battery charging function by means of mini USB socket for playback devices with the
appropriate connection
Intended use
-
Only suitable for use in indoor areas
-
Flush-mounting in wall box according to DIN 49073
4 Operation
The docking station is permanently operational and does not have to be switched on.
Operating iPod/iPhone*
Attach the device to the 30pol multipoint connector (figure 1, 1) of the device holder.
The playback can be started by the device.
L
L
As soon as the contact is established by means of the multipoint connector, the device
battery is charged.
Operating mobile player by means of jack
Insert 3.5 mm jack of the device into the socket
AUX
(figure 1, 8).
Press changeover switch
ON/OFF
(figure 1, 7).
The-LED display (figure 1, 3) lights up. The playback can be started by means of the
device.
Adjusting volume
Press
VOL +
(figure 1, 5) button or
VOL –
(figure 1, 4) along the bottom of the device
holder.
Charging mobile player by means of mini USB charging socket
Insert USB charger cable of the device that is to be charged into the mini USB charging
socket (figure 1, 2).
L
L
Only one device can be charged at a time. The charging function for iPod/iPhone* has
priority over the mini USB interface.
The attached device will first be charged after an iPod/iPhone* in the docking station has
been fully charged.
* iPod and iPhone are registered trademarks of Apple Computer Inc.
